Making Wooden Chess Sets 15 One-of-a-Kind Designs for the Scroll Saw Chess pieces and their boards are a thing of beauty that serious players often like. made from Wenge and Hard Maple. Enjoy Please rate, comment and subscribe to let me know what you think. How to Make Perfectly Carved Wooden Chess Set at Home. Designing the chess pieces: The very first step is to choose a design for your chess pieces. Carving the pieces on wooden lathe: Take two different kinds of woods, one for darker side and for lighter side. Doing the fine carving: Now this is the most challenging.
|Published:||2 November 2014|
|PDF File Size:||18.8 Mb|
|ePub File Size:||15.78 Mb|
Making Wooden Chess Sets — 15 One-of-a-Kind Projects for the Scroll Saw - Lee Valley Tools
Woodworker and author Jim Kape takes this competitive mind sport to the next level, with 13 classic and modern designs of chess sets that are true conversation starters. Product Description Making Wooden Chess Sets - 15 One-of-a-Kind Projects for the Scroll Saw Chess pieces and making wooden chess sets boards are a thing of beauty that serious players often like to display around their home.
Building the Box Once the coving is done, cut the side pieces to rough length and then accurately miter them. Instead of angling the blade, I use a homemade sled.
GMC Publications Making Wooden Chess Sets - Woodworking - Yandle & Sons Ltd
To deter tear-out, always back up the cut with a piece of scrap wood so that when the blade exits the work it does so cleanly. The grain on the splines must be perpendicular, not parallel, making wooden chess sets the length, for additional strength.
- How to Make a Classic Chess Board - Popular Woodworking Magazine
- How to Make a Classic Chess Board
Next, sand all the inside faces of the box and apply masking tape to the inside edges of the box sides to help gather any glue that making wooden chess sets out. Masking tape with glue on it is easier to remove than hardened glue in the corners.
Then you can dry-assemble the box to ensure that everything fits properly.
If it does, glue up the piece on a nice, flat surface. My splines extended a little above the top edge so I pared them off with a sharp chisel later.
Never leave them below the surface — it looks terrible. Surgical tubing can be stretched tightly, applying pressure evenly to the joints.
Once the box parts are positioned properly, put the tubing on and remove the clamps. After checking to make sure everything is square, let the box sit overnight. The next day, clean up any squeezed-out glue at the joints then carefully cut around the outside making wooden chess sets the box to remove the lid, as seen at right.
| Making Wooden Chess Sets, Jim Kape | | Boeken
There are, as the cover suggests, 15 one-of-a-kind projects for the scroll saw. There is a classic and two neo-classic sets that are close to traditional but certainly unique as cut with the scrollsaw. Add these to the architectural collection like Paris, Canterbury, Venice, Rome and San Francisco and you have a fully rounded out chess set collection that is to die for.
making wooden chess sets
Now, if you were counting you will realize that the list is short by four. When you have eight strips groove the remaining ends so that making wooden chess sets each alternate strip is reversed tongues can be inserted between them to reinforce the end grain joints.
If the board is not to be bordered I.